WELCOME IN THE DOWNLOAD AREA
Here you can download the products manuals and quick guides, drivers and firmwares.
Manual HUB-IT: English, German, French, Italian, Spanish
Manual HUB-IT: American English, Canadian French, Latin Spanish
Manual HUB-IT: Czech
Manual HUB-IT: Danish
Manual HUB-IT: Dutch
Manual HUB-IT: Finnish
Manual HUB-IT: Greek
Manual HUB-IT: Hungarian
Manual HUB-IT: Norwegian
Manual HUB-IT: Polish
Manual HUB-IT: Portuguese
Manual HUB-IT: Romanian
Manual HUB-IT: Russian
Manual HUB-IT: Slovak
Manual HUB-IT: Swedish
Guida Rapida – Quick Start
Guida Rapida – Personalizzazione
When a computer or another host is connected, the port enters in SDP (Standard Downstream Port) mode. In this mode, the computer limits the current to 500mA or 900mA. When a computer is not connected, HUB IT automatically enters in Dedicated Charging Port Mode and all the ports are able to supply up to 2500mA (Fast Charge). Standard firmware doesn’t allow fast charge when a computer is connected.
Click here to Download the STANDARD FIRMWARE
This firmware allows simultaneous USB data transfer and fast charge.
When a computer or another host is connected, the port enters in CDP (Charging Downstream Port) mode, and the port is able to supply 2500mA (Fast Charge) and to transfer data at the same time. When a computer is not connected, HUB IT automatically enters in Dedicated Charging Port Mode and all the ports are able to supply up to 2500mA (Fast Charge), as in the standard version. Please note that your device must be USB Battery Charging 1.2 compliant, otherwise it will not recognize the enhanced CDP mode.Please note that some device are not compatible with CDP mode: in this case, you must choose standard firmware.
Click here to Download the ENHANCED FIRMWARE
Technical Sheet – ENG