Integrated Circuits
Epic - Eggtronic Power Integrated Controller


Epic is a family of mixed-signal, low-power, cost-optimized power conversion controllers designed for high-performance power converters and wireless power transmitters and receivers.
Thanks to the flexible internal structure Epic tackles both standard and proprietary power conversion architecture control.
Epic is a family of mixed-signal controllers, based on ultra-low-power cores ranging from low-cost 8-bit up to high performance 32-bit RISC-V cores, plus a rich ecosystem of high-performance digital and analog peripherals.
Eggtronic designs tailor-made ASICs for specific power conversion and wireless power transfer applications in a quick and cost effective way, thanks to the flexibility, high performance and cost-effectiveness of the EPIC architecture.
AC/DC Controllers

- UFQFPN28
- 4mm x 4mm
- 28 pins
- Based on proprietary QuarEgg architecture
- Best suited for USB PD 3.1 AC/DC power adapters without PFC
- Integrated USB Power Delivery 3.1
- Peak efficiency > 95%
- Light load efficiency >90%
- Stand-by power consumption < 18mW
- Integrated synchronous rectification
- No optocoupler needed
EPIC203ACQE
Primary side ZVS flyback controller

- QFN40
- 6mm x 6mm
- 40 pins
- Based on proprietary QuarEgg architecture
- Best suited for low cost high efficiency fixed output power adapters without PFC to reduce energy loss from idle to full power of small electric and electronic devices (home assistants, decoders, ...)
- Peak efficiency > 94%
- Light load efficiency >90%
- Stand-by power consumption < 18mW
- No optocoupler needed

- LQFP48
- 7mm x 7mm
- 48 pins
- Based on proprietary SmartEgg architecture
- Dramatic BOM reduction for cost-effective and high-power-density battery chargers with PFC
- Best suited for high power low cost battery chargers for home appliance, e-bikes, drones, robots
- Enables peak efficiency > 95% from AC input to DC output

- QFN40
- 6mm x 6mm
- 40 pins
- Based on proprietary ClassEgg architecture
- Best suited for high-efficiency PSU for home appliance, TV panels, and computers
- Enables total peak efficiency > 95%
- Efficiency of the boost PFC > 98%
- Efficiency of the LLC > 97%
Qi Wireless Power Controllers
EPIC101ANQI

- TQFP64
- 10mm x 10mm
- 64 pins
- Controller for in-vehicle Qi wireless power transmitter
- Automotive-qualified WPC 1.3 Qi wireless transmitter
- 5W BPP / 7.5W Apple Fast Charge / 10W Samsung Fast Charge 1.0 / 15W EPP charging algorithms
- NFC / CAN / LIN support
- Customizable UDS diagnostic stack
- Integrated buck-boost controller for wide input range
EPIC102AHQI

- UQFN36
- 5mm x 5mm
- 36 pins
- Controller for WPC 1.3 Qi wireless power transmitters
- Best suited for consumer and industrial applications
- 5W BPP / 7.5W Apple Fast Charge / 10W Samsung Fast Charge 1.0 / 15W EPP charging algorithms
- I2C / SPI / UART data-over-power bidirectional communication
- Highly customizable I/O
EPIC201ACQI

- QFN40
- 6mm x 6mm
- 40 pins
- Combo Power Manager Controller integrates in a single controller a Qi 1.3 RX + USB-PD + battery manager
- Best suited for consumer and industrial applications
- Dual mode operation: USB and Qi charging
- 5W BPP / 7.5W Apple Fast Charge / 10W Samsung Fast Charge 1.0 / 15W EPP charging algorithms
- 0.5W - 15W (Operating voltage 5V)
- I2C / SPI / UART data-over-power bidirectional communication
- Highly customizable I/O
- Bidirectional Battery Manager with highly customizable charging / discharging speed
EPIC103BHQI

- DFN8
- 3mm x 2mm
- 8 pins
- Controller for Qi 1.2 Wireless Power Receiver
- Low power receiver with wireless charging functionality for small portable electronics products
- Best suited for consumer and industrial applications
- 0.5W - 5W (Operating Voltage Range: 1.8V to 5.5V)
- Highly customizable I/O
E2Watt Wireless Power Controllers
EPIC201ACEE

- QFN40
- 6mm x 6mm
- 40 pins
- Based on proprietary E2Watt architecture
- Controller for high-power wireless transmitters
- Up to 10kW wireless power
- Optionally back-compatible with Qi (in low-power applications)
- I2C / SPI / UART / USB low-latency high-bandwidth data-over-power
EPIC202ACEE

- QFN40
- 6mm x 6mm
- 40 pins
- Based on proprietary E2Watt architecture
- Controller for high-power wireless receivers
- Up to 10kW wireless power
- Optionally back-compatible with Qi (in low-power applications)
- I2C / SPI / UART / USB low-latency high-bandwidth data-over-power
- Battery Charger (CC /CV), fixed voltage, USB Power Delivery 3.1 output